The best Caspian Explorer build is the one that puts every spare ton of mass into jump range and still carries the tools you actually use on a long trip: a fuel scoop, a Detailed Surface Scanner, an SRV bay and a repair module. Rate the frugal modules D, rate the frame-shift drive (FSD) A, engineer the FSD first, and keep a Guardian FSD Booster in the biggest slot that allows one. The sections below walk through each choice, and EDCC’s exploration ship builds page lets you browse finished loadouts to compare against your own.
TL;DR
-
The Caspian Explorer launched on 2 December 2025 through ARX Early Access, with a Size 8 FSD, 14 optional internal slots and seven hardpoints (six medium, one large).
-
Stock, it jumps only 21.83 LY unladen. The jump range comes from the build: an A-rated FSD, D-rated everything else, and engineering in the right order.
-
The Mk II Supercharge Optimised FSD gets a bigger boost at neutron stars and white dwarfs, so keep fuel capacity for long jet-cone sequences.
-
Mk II armor and gravity optimised thrusters make landing on high-gravity worlds safer, but they cost range. Decide which trip you are building for.
-
Engineering eats materials. Count what you hold before you leave, not at the first workshop.
Table of Contents
What the Caspian Explorer is built for
Frontier describes the Caspian as a large exploration vessel with a Size 8 FSD and generous internals, designed to carry every tool an explorer needs without sacrificing jump range. The same dev blog says its Size 8 FSD, generous internals and seven hardpoints also let it handle long-range trading and mining, so it is more flexible than a pure explorer.
The official store page gives the stock numbers you are starting from. It has a fighter bay, three extra multi-crew seats and needs a large landing pad. Top speed is 205 m/s and boost speed is 283 m/s. It has 196 shields, 621 armor, 825 T of mass and 96 T of cargo capacity. Its FSD range is 19.38 LY laden and 21.83 LY unladen.
That stock range is the number to keep in mind. A ship that jumps 21.83 LY out of the box is a hauler’s frame, not an explorer. Everything below is about closing that gap without stripping out the things that keep you alive and productive far from home.
Which version should you start from
The Caspian was released in three ARX bundles, per Frontier’s launch post. The Elite Gamestore lists the pre-built ship prices as follows.
| Version | Price | What it adds |
|---|---|---|
| Standard | 19,020 ARX | Ship, shipyard unlock, Owners Club decal |
| Stellar | 38,000 ARX | High-spec exploration loadout, Class 8 Mk II SCO FSD, Mk II armor and Mk II thrusters, Journey Slate paint, Voyage Ship Kit |
| Galactic | 69,000 ARX | Everything in Stellar plus two ship kits, six paint jobs and the Lodestar holo-kit |
The Stellar loadout is the shortcut for anyone who wants the Mk II modules in the ship from day one. If you buy Standard, you build everything yourself, and the build logic below applies in full. In either case, you are not locked into the factory fit: the Mk II modules are the part that makes the Caspian distinct, and the rest is yours to outfit.
The rule behind every exploration build
Exploration builds follow one principle: mass is range. Every ton you do not carry adds to your jump distance, so the usual approach is simple.
-
A-rate the FSD. It sets your jump range directly, so this is where the quality goes.
-
D-rate nearly everything else. D-rated modules are the lightest in their class.
-
Downsize the power plant and thrusters. Fit the smallest sizes that still lift you off the highest-gravity planet you plan to visit.
-
Skip weapons you will not use. The Caspian has seven hardpoints, but an exploration build can leave most of them empty or fitted with a light utility load. Hardpoints do not cost you range unless you fill them with heavy weapons.
The temptation is to cut too deep. A build with no scanner, no repair module and no SRV jumps far but cannot do the things you are exploring for. The Caspian’s 14 optional internal slots, including one size-7, two size-6 and four size-5 slots, are there so you do not have to choose, according to the November dev blog.
A practical all-purpose module list
Use this as a starting point and adjust to your trip.
| Slot | Fit | Why |
|---|---|---|
| FSD | 8A Mk II SCO FSD | Sets jump range and unlocks the stronger neutron and white dwarf boost |
| Guardian FSD Booster | Largest that fits | Adds a flat bonus to jump range |
| Power plant | Smallest A-rated size that runs the build | Less mass than an oversized D-rated plant |
| Thrusters | Smallest size that lifts off your target gravity | Saves mass; the Mk II gravity-optimised thrusters are size 7 |
| Power distributor, sensors, life support | D-rated, lightweight | Mass savings stack across slots |
| Fuel tank | Keep the default | Long jet-cone boost sequences need capacity |
| Fuel scoop | Biggest class available | Faster refuels at every star |
| Detailed Surface Scanner | One | Core discovery tool |
| Auto Field-Maintenance Unit | One or two | Repairs modules in the field |
| Planetary vehicle hangar | One SRV bay | Surface work |
| Shield generator | Small, D-rated | A light safety net, not a combat build |
| Heat sinks | A few | Emergency heat management |
Two choices deserve more attention.
The fuel tank. It is tempting to swap the default tank for something smaller to save mass. Don’t. The supercharged jump sequence at neutron stars burns fuel quickly, and a small tank forces extra scooping stops that cost more time than the mass saving buys.
The shield. A heavy shield looks reassuring but is the single largest mass cost in a combat-style loadout. On an exploration build a small shield is enough for the odd bad landing or a stray encounter, and the seven hardpoints and Mk II armor are not meant to turn the ship into a fighter.
Engineering in the right order
Engineering is where the Caspian goes from 21.83 LY to a genuine long-range ship. The order matters, because each step changes what the next one is worth.
-
FSD: Increased Range. This is the biggest single gain, so do it first. Grade 5 is the target for a distance build. If you are short on materials, an earlier grade still gives a noticeable gain.
-
Lightweight Alloys on the hull and core modules. The saving is in mass, and mass is range. Apply it widely.
-
Shielded fuel scoop. Protects your scoop when you are skimming stars at high heat.
-
Low Emissions power plant. Reduces heat at the plant, which helps when you scoop repeatedly.
-
Optional: Mass Manager on the FSD. Adds a further range bonus once the basics are in place.
A grade 3 engineer pass across the secondary modules is often a better trade than grade 5 everywhere. The last two grades cost far more materials than they return in range, especially on shields. The FSD is the exception: the extra grades pay off most there.
Check your range in the outfitting screen after each change. The displayed jump range updates as you swap modules, which makes it easy to see what each step is worth. Use the laden figure when you plan a trip, since you will be carrying fuel and cargo rather than flying empty.
Neutron highways and the SCO FSD
The Mk II Supercharge Optimised FSD is the reason the Caspian suits neutron-highway routes. According to Frontier’s 4.3.0.0 update, the size-8 Mk II Supercharge Optimised FSD boosts more strongly when scooping at neutron stars or white dwarfs. The November dev blog describes the same module as an FSD supercharge upgrade that extends range when scooping from those stars.
What this means in practice:
-
Plan around neutron stars. Your route plotter will mark them. The supercharge multiplies your next jump, so a chain of neutron stars covers distance far faster than a plain star-to-star route.
-
Keep the fuel tank. The supercharged jumps are long, and a full tank means fewer refuel stops between neutron fields.
-
Watch your heat. Scooping a neutron star cone is the time when a Low Emissions plant and a few heat sinks earn their place.
-
Do not sell your fuel scoop short. Between neutron fields you still need to refuel at ordinary scoopable stars, and a large scoop makes those stops short.
The jump range you see in outfitting is the plain, unboosted number. Your effective range on a neutron highway is a multiple of it, so a modest drop in base range from carrying a larger tank is usually worth it if it saves you a refuel stop.
Mk II armor and thrusters: when they are worth it
The Stellar loadout and the Mk II modules exist for planetary work. Frontier says the Mk II armor enables steeper, faster glides and seamless orbital approaches, and the gravity-optimised thrusters are meant for near-planet flight. The 4.3.0.0 update notes add that the size-7 Mk II Gravity Optimised Thrusters reduce the most severe effects of gravity on high-G worlds.
That gives you a choice that depends on where you are going.
-
Deep-space crossing, few landings. Build for range. Use lightweight alloys and the smallest thrusters that work, and accept that high-gravity landings need care.
-
Surface-heavy trip, exobiology or many landings. The Mk II armor and thrusters are the better fit. Your jump range will be lower than a pure distance build, but you can land and take off on worlds that would be awkward otherwise.
-
Mixed trip. Build for range, and keep a second loadout saved for the planets you intend to visit. Swapping modules at a station takes minutes.
Pilots on the Frontier forums have reported that the Caspian’s high optimised mass lets it carry heavier armor with a smaller range penalty than you might expect, though results depend on the exact build. Test your own loadout in outfitting and read the range number instead of trusting a rule of thumb.
Three builds, three jobs
The distance build. A-rated Mk II SCO FSD with Increased Range, a Guardian booster, D-rated lightweight everything else, the default fuel tank, and the minimum internals: scoop, DSS, AFMU. This is the build for Distant Worlds-style crossings and the galactic core.
The all-purpose build. The same core, plus an SRV bay and a second AFMU, with a small D-rated shield and a few heat sinks. You give up a little range for the ability to land, scan and repair. For most commanders this is the right default.
The loaded build. Mk II armor and thrusters, a bigger shield and a heavier hull. Range falls, but the ship is far more forgiving on rough landings and in surprise encounters. It suits short surface-heavy expeditions rather than long crossings.
None of these is the only correct answer. The right one depends on how many days you plan to be away, and how many of them you plan to spend on the ground.

Tracking the materials your build needs
Engineering is the part of a Caspian build that goes wrong most often, and it is rarely the ship’s fault. You arrive at an engineer, start the FSD pass, and discover you are short of one material. The fix is to count first.
Before you leave, work out the following:
-
The blueprint chain. List every module you intend to engineer and the grade you want.
-
The materials each grade needs. Add them up across the whole build, not module by module.
-
What you already hold. Compare it against the total and note the shortfall.
-
Where to restock. Plan to pick up what you are missing before you enter the deep, not after.
-
Experimental effects. These consume components too, and are easy to forget in the total.
EDCC is built for this part of the job. It is a Windows desktop companion for Elite Dangerous that tracks materials and engineering blueprints, manages your fleet and ship builds, and supports exploration and trip planning in one place. That means the materials count, the build you are working toward and the trip you are planning sit in the same app instead of in three separate notes.
Keeping your data on your own machine
Ship builds, fleet lists and material counts say a lot about how you play. It is reasonable to want them to stay with you. EDCC keeps your journal data local, so your commander activity is tracked on your own PC and is not sent off to a server to be processed. For an explorer who spends hours building and rebuilding loadouts, that also means the app does not depend on a connection to open your fleet or check your materials.
Where EDCC fits in a Caspian build
The Caspian is a ship worth planning rather than improvising. The module list is long, the engineering chain is expensive, and the best loadout changes with the trip. EDCC brings together the pieces you would otherwise juggle: your ship builds, your fleet, your materials and engineering blueprints, and your exploration and trip planning. The ship catalogue lists the ships, and the exploration builds page shows community loadouts you can use as a starting point for your own Caspian.

The app is marked as coming soon, and the roadmap shows what is planned. You can follow the progress from the EDCC home page.
A pre-flight checklist
Before you leave the bubble, run through this list.
-
Your FSD is A-rated, engineered for Increased Range, and your Guardian booster is fitted.
-
Your power plant is the smallest size that runs everything, and your thrusters can lift you off the highest-gravity world on your route.
-
You kept the default fuel tank and fitted the largest fuel scoop.
-
A Detailed Surface Scanner, at least one AFMU and an SRV bay are in place if you plan to land.
-
You have counted the materials for any engineering you plan to do on the road.
-
You have saved a second loadout if your trip includes both long jumps and heavy surface work.
-
You checked your laden jump range in outfitting, not the stock figure.
FAQ
Is the Caspian Explorer available in Elite Dangerous?
Yes. It launched on 2 December 2025 through ARX Early Access, as described in Frontier’s launch post. It comes in Standard, Stellar and Galactic bundles. Check the in-game store for the current availability.
How far can the Caspian Explorer jump?
Stock, it manages 21.83 LY unladen and 19.38 LY laden, per the Elite Gamestore page. With an A-rated FSD, lightweight modules and engineering, the range rises well beyond that. Read the figure in outfitting for your exact loadout, because it depends on mass and fuel.
What is the Caspian Explorer good for?
It is built for long-range exploration, with a Size 8 FSD and generous internals. Frontier also says it can adapt to long-range trading and mining, according to the November dev blog. Its Mk II modules are aimed at planetary approach and neutron-star supercharging.
How much does the Caspian Explorer cost?
The Standard pre-built ship is 19,020 ARX, Stellar is 38,000 ARX and Galactic is 69,000 ARX, according to the Elite Gamestore. Prices can change, so confirm them in the store before you buy.
